Frequent
dust mopping and immediate clean up of spills
are critical to great looking floors. Use only
clean dust mops with a good mop treatment.
Follow
dilution instructions carefully to conserve
cleaner and protect finish. Cleaners should
be strong enough to remove soil without damaging
your finish. The cleaner solution is too strong
if your finish looks hazy and dull after cleaning.
Always
use clean scrubbing pads or brushes on auto
scrubbers and rotary machines, and clean cotton
mops for hand mopping.
Deep
scrub floors before re-coating to prevent floor
finish buildup and delay stripping. Mix a cleaning
solution suitable for heavy soil; apply with
a mop or auto scrubber. Scrub the floor using
an automatic or rotary machine equipped with
black stripping pads, then pick up solution
and rinse. Surface should be clean and free
of scratches, heel marks, and any cleaner residue.
Recoat with finish.
