Follow
recommended dilution; stronger isn't always
better. The stripping solution must contain
some water to be effective.
Allow
the stripper solution to penetrate the finish
for several minutes before scrubbing. For heavy
buildup, you may have to apply more stripper
to the floor as the stripper solution becomes
saturated with old loosened finish.
To
check if the floor is ready for scrubbing, scrape
the finish film with the center section of a
floor pad. (Be sure you are wearing rubber gloves.)
If you easily scrape the bare floor, it is ready
to scrub. If the pad scrapes only a slippery
layer of finish, then you need more time or
more stripper solution.
