DIRECTIONS:
Preparation: If stripping is necessary,
use a high quality stripper and follow directions
accordingly. If the floor is in good condition
and stripping is not necessary, sweep up excess
dirt and dust and then clean with a good quality
cleaner to remove dirt and oils. Follow with
a thorough rinsing and allow to dry completely.
FINISHING: Spread a liberal
coat of thermal plastic floor finish evenly
on floor with a clean mop or applicator. Allow
first coat to dry one hour before applying the
next coat. A minimum of 3 coats is desired for
optimum performance when high speed buffing.
MAINTENANCE: Mop with a diluted
solution of all-purpose cleaner to remove soil.
Buff using a high- speed floor machine (1000
R.P.M. or above) to remove scuffs and provide
a mirror like shine. These janitorial supplies meet the
maximum content requirement for Volatile Organic
Compounds (VOCs) as established by state and
Federal regulations.
| Type: |
Thermalplastic
acrylics |
Buffability: |
Dry
burnishable |
| Non-volatile
solids: |
23.0±0.5% |
Removability:
|
With
instant type strippers |
| Color: |
Milky white |
Detergent
Resistance: |
Excellent |
| Odor: |
Mild
|
Waterspot
Resistance: |
Excellent |
| pH: |
8.5
- 9.0 |
Heel
Mark Resistance: |
Excellent |
| Dry/Recoat
Time: |
45
minutes min. |
VOC
Content: |
0.40
lbs./gal. |
| Slip
Resistance: |
.60
- .65 (ASTM-D2047-82) |
Storage/Stability:
|
2
years |
| Leveling: |
Excellent |
Freeze/Thaw
Stability: |
Keep
from freezing |
| Gloss: |
90+
specular |
Weight
per Gallon: |
8.51
lbs./gal. |
| |
|
Coverage: |
2000-2500
ft2 per gal. |
