For
Use On:
Linoleum, Vinyl Tile, Rubber Tile, Vinyl
Asbestos, Asphalt Tile
DIRECTIONS:
Make sure floor has been thoroughly stripped
and rinsed and allowed to dry. For porous
or well-worn floors, apply 2 coats of sealer
followed by 2 or more coats of finish depending
on the gloss desired. On new floor or floors
in good condition, one coat of sealer should
suffice. This product meets the maximum content
requirements for Volatile Organic Compounds
(VOCs) as established by state and Federal
regulations.
| Type: |
Modified
acrylic |
Removability:
|
With
conventional strippers |
| Non-volatile
solids: |
18.0±0.5% |
Detergent
Resistance: |
Excellent |
| Color: |
Milky white |
Stain
Resistance: |
Good |
| Odor: |
Mild
|
Chemical
Resistance: |
Good |
| pH: |
8.5
- 9.0 |
VOC
Content: |
0.31
lbs./gal. |
| Dry/Recoat
Time: |
30
minutes |
Storage/Stability:
|
2
years |
| Slip
Resistance: |
.56
- .60 (ASTM-D2047-82) |
Freeze/Thaw
Stability: |
Keep
from freezing |
| Leveling: |
Excellent |
Weight
per Gallon: |
8.56
lbs./gal. |
| Sediment: |
0.1%
by volume, max. |
Coverage: |
1000-1500
ft2 per gal. 1500-2000 ft2 per gal. |
