For
Use On:
Vinyl
Tile, Vinyl Asbestos, Asphalt Tile*, Linoleum,
Rubber Tile*, Concrete, Flagstone,
Sealed Wood, Terrazzo, Ceramic Tile.
DIRECTIONS:
The desired concentration will depend on the
build-up and age of the polish film. As a
starting point dilute with cold water as follows:
For
Aveage Build-Ups: Dilute 1 to 3 with cold
water.
For Moderate Build-Ups: Dilute 1 to
2 with cold water.
For
Heavy Aged Build-Ups: Dilute 1 to 1 with
cold water.
For
Use With a Floor Machine: Dilute 1 to
8-16 parts cold water. Mop a generous solution
onto the floor to be stripped. Allow solution
to stand about 5 minutes keeping the floor
wet at all times. If mop stripping - agitate
with the mop. If using an automatic scrubber
or rotary floor machine, no mop agitation
is required. Pick-up the solution with a wet
vacuum, automatic scrubber or clean mop. Allow
floor to dry thoroughly prior to applying
any sealer or finish. If desired, a rinsing
step can be added. *NOTE: Asphalt tile and
rubber flooring could be affected by stripping
solutions in high concentrations. Always test
floor before proceeding.
Active
Ingredients: 50.0 ± 0.5%
Color: Clear
Odor: Sassafras
pH: 13.0 - 13.5
Viscosity: Water thin
Foam: Low
Abrasives: None
Phosphate Content: None
Solubility: Complete with water |
Emulsification:
Excellent
Detergency: Excellent
Rinsability: Excellent
Flash Point: 145oF (TCC)
Biodegradability: Complete
Storage/Stability: 2 years
Weight per Gallon: 8.27 lbs./gal.
Freeze / Thaw Stability: Keep from freezing |
