A complete line of janitorial and cleaning chemicals

DIRECTIONS:
PREPARATION: If stripping is necessary, use a high quality stripper and follow directions accordingly. If floor is in good condition and stripping is not necessary, sweep up excess dirt and dust and then clean with a good quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow drying completely. FINISHING: Apply 2 or 3 liberal coats of finish using a clean mop. Allow a minimum of 45 minutes drying time between coats. Apply additional coat to obtain desired gloss. BURNISHING: Dust mop or sweep thoroughly. Clean floor with a neutral floor cleaner diluted according to directions. Burnish using the appropriate pads. RESTORATION: Dust mop or sweep thoroughly. Dilute restorer according to manufacturer direction and apply to floor with clean mop or auto-scrubber. Allow to dry to a haze and buff out with any type of UHS equipment-propane, battery, or cord electric. RECOATING: Dust mop or sweep thoroughly. Deep scrub using a neutral floor cleaner diluted according to directions. Apply 1 or 2 liberal coats of finish using a clean mop.

1. Quick Curing Time
Mega Flex’s patented polymer technology allows for easy application and superior film formation in hot humid conditions that would surpass conventional finishes on the market today. Of course, optimal conditions are best for optimal performance, but when time is limited, especially in the summertime, Mega Flex is your finish. In humid conditions, Mega Flex will not haze or produce a film.

2. Goof Proof Application
Even with an inexperienced applicator, Mega Flex is easy to apply and goes down without streaks and is self-leveling. Mega Flex has a consistent particle size distribution, improving gloss and leveling, while reducing mop drag. This consistent particle size also eliminates micro coagulation, which reduces gloss.

3. Easy, Flexible Maintenance
This new patented polymer technology allows Mega Flex to be maintained in a variety of ways. Mega Flex can be maintained as a high or ultra high speed finish by dry burnishing or using restoration type products. Mega Flex also performs equally well as a low maintenance finish using standard equipment and spray buffing. Mega Flex’s gloss and durability will respond beautifully to either maintenance procedure.

4. Test Results & Observations
Initial Application: MISCO’s Mega Flex floor finish exhibits better gloss and leveling than SC Johnson’s “Carefree,” particularly during the first three coats of application. Long Term Durability: Mega Flex provides better gloss retention and better response to high speed propane burnishing. Mega Flex does not show swirling and provides higher gloss numbers than SC Johnson’s Carefree Floor Finish.

For Use On: Linoleum
Vinyl Tile Rubber Tile
Vinyl Asbestos Terrazzo
Asphalt Tile Quarry Tile