A complete line of janitorial and cleaning chemicals

For Use On:
Vinyl Tile, Vinyl Asbestos, Asphalt Tile*, Linoleum, Rubber Tile*, Concrete, Flagstone,
Sealed Wood, Terrazzo, Ceramic Tile.

DIRECTIONS:
The desired concentration will depend on the build-up and age of the polish film. As a starting point dilute with cold water as follows:

For Aveage Build-Ups: Dilute 1 to 3 with cold water.

For Moderate Build-Ups: Dilute 1 to 2 with cold water.

For Heavy Aged Build-Ups: Dilute 1 to 1 with cold water.

For Use With a Floor Machine: Dilute 1 to 6-12 parts cold water. Mop a generous solution onto the floor to be stripped. Allow solution to stand about 5 minutes, keeping the floor wet at all times. If mop stripping - agitate with the mop. If using an automatic scrubber or rotary floor machine, no mop agitation is required. Pick-up the solution with a wet vacuum, automatic scrubber or clean mop. Allow floor to dry thoroughly prior to applying any sealer or finish. If desired, a rinsing step can be added. *NOTE: Asphalt tile and rubber flooring could be affected by stripping solutions in high concentrations. Always test floor before proceeding.