A complete line of janitorial and cleaning chemicals

For use on:
Wood, Cork, Gymnasium Floors, Parquet Floors.

DIRECTIONS:

For New Wood Flooring Or Renovating Old Floors: Abrade previously coated floors using a #100 or #120 grit screen disk and vacuum thoroughly. Tack rag using only water and allow floor to dry thoroughly. Apply a medium to thin coat of finish to the floor using a heavy weight floorcoater with a waterbased finish pad or gravity fed applicator with a waterbased finish pad. Allow to dry 1 to 2 hours (depending on weather conditions), before applying the next coat. Three to four coats of finish are recommended to produce optimum gloss and wear. Screening between coats is only necessary if the prior coat has dried longer than 8 hours. Allow 24 hours curing time prior to the return of normal traffic. Allow one week (7 days) curing for heavier traffic. Clean-up using warm water and mild soap.

NOTE: Best results are obtained with adequate ventilation and floor temperature between 60°F. and 95°F. During drying, avoid direct drafts on floor. Do not pour unused product back into container.