For
Use On:
Linoleum,
Quarry Tile, Vinyl Tile, Rubber Tile, Vinyl Asbestos,
Terrazzo, Asphalt Tile, Sealed Wood.
DIRECTIONS:
Preparation: If stripping is necessary,
use a high quality stripper and follow directions
accordingly. If floor is in good condition and
stripping is not necessary, sweep up excess dirt
and dust and then clean with a good quality cleaner
to remove dirt and oils. Follow with a thorough
rinsing and allow to dry completely.
FINISHING: Apply 2 or 3 liberal
coats of finish using a clean mop. Allow 30-45
minutes drying time between coats. Apply additional
coat to obtain desired gloss.
BURNISHING: Dust mop or sweep
thoroughly. Clean floor with a neutral floor cleaner
diluted according to directions. Burnish using
the appropriate pads.
RECOATING: Dust mop or sweep
thoroughly. Deep scrub using a neutral floor cleaner
diluted according to directions. Apply 1 or 2
liberal coats of finish using a clean mop. This
product meets the maximum content requirements
for Volatile Organic Compounds (VOCs) as established
by state and Federal regulations.
| Type: |
Modified
acrylic |
Buffability: |
Dry
burnishable |
| Non-volatile
solids: |
22.0±0.5% |
Removability:
|
With
instant type strippers |
| Color: |
Milky white |
Detergent
Resistance: |
Excellent |
| Odor: |
Mild
|
Waterspot
Resistance: |
Excellent |
| pH: |
8.5
- 9.0 |
Heel
Mark Resistance: |
Excellent |
| Dry/Recoat
Time: |
45
minutes min. |
VOC
Content: |
0.39
lbs./gal. |
| Slip
Resistance: |
.60
- .65 (ASTM-D2047-82) |
Storage/Stability:
|
2
years |
| Leveling: |
Excellent |
Freeze/Thaw
Stability: |
Keep
from freezing |
| Gloss: |
90+
specular |
Weight
per Gallon: |
8.54
lbs./gal. |
| |
|
Coverage: |
2000-2500
ft2 per gal. |
|
