|
| RUB
RUBY 2 Non-Butyl Low Odor Speed Stripper |
| |
This non-butyl product is a low-odor, non-corrosive stripper that will remove heavily recoated and burnished floor finishes. Designed to strip the first time, this product is ideal for use in areas such as hospitals, schools, nursing homes, and poorly ventilated areas where there is exposure to the public.
| 2.5 Gallon Bottles (2 per case) |
$107.33 |
Buy Now! |
| 55 Gallon Drum |
$680.90
(call to order) |
|
|
| |
|
| |
DIRECTIONS:
The desired concentration will depend on the build-up
and age of the polish film. As a starting point
dilute with warm water as follows:
Average Floor Conditions: - Dilute 1 to 3
with warm water
Moderate Build-Up Or Burnished Floors: - Dilute
1 to 2 with warm water.
Heavily Aged Build-Ups, Extended Burnishing:
- Dilute 1 to 1 with warm water.
Use With A Floor Machine Or Autoscrubber:
- Dilute 1 to 8-16 parts cool water. Mop a generous
solution onto the floor to be stripped. Allow
solution to stand about 5 minutes keeping the
floor wet at all times. If mop stripping - agitate
with the mop. If using an automatic scrubber or
rotary floor machine, one or two passes with the
scrubber will be sufficient. Pick-up the solution
with a wet vacuum, automatic scrubber or clean
mop. Allow floor to dry thoroughly prior to applying
any sealer or finish. If desired, a rinsing step
can be added.
Note: Asphalt tile and rubber flooring could
be affected by stripping solutions in high concentrations.
Always test floor before proceeding.
| Active
Ingredients: |
35.0
± 0.5% |
Rinsability: |
Excellent |
| Color: |
Red |
Flash
Point: |
None |
| Odor: |
Spring fresh |
Biodegradability: |
Complete |
| pH: |
11.5
- 12.0 |
Storage/Stability: |
2
years |
| Viscosity: |
Water
thin |
Weight
per Gallon: |
8.43
lbs./gal. |
| Foam: |
Low |
Freeze/Thaw
Stability: |
Keep
from freezing |
| Abrasives: |
None |
|
|
| Solubility: |
Dispersable |
|
|
| Emulsification: |
Excellent |
|
|
| Detergency: |
Excellent |
|
|
|
|
