A complete line of janitorial and cleaning chemicals

For Use On:
Vinyl Tile, Vinyl Asbestos, Asphalt Tile*, Linoleum, Rubber Tile*, Concrete, Flagstone,
Sealed Wood, Terrazzo, Ceramic Tile.

DIRECTIONS:
General Application: Mix 32 ounces of concentrate to each gallon of warm water. Spread a liberal amount of stripping solution on to floor with a mop. Use solution generously and keep floor uniformly wet. Let solution stand for about 5 minutes. Scrub thoroughly with a floor machine using a stripping pad. Pick up solution with mop or wet-vacuum. Rinse thoroughly with clean water, removing all remaining solutions. Allow floor to dry completely before applying any floor finish.

For Auto-Scrubbers: Add 32 ounces of concentrate per each gallon of water in holding tank. Apply solution to floor and allow to stand for 5 minutes. Run scrubber in normal operation. Pick-up solution and follow with clean water rinse. Allow to dry completely before applying finish. *NOTE: Asphalt tile and rubber flooring could be affected by stripping solutions in high concentrations. Always test floor before proceeding.